Sierra Wireless AceView User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
AirLink Communications January 2007 11
PPPoE: Point to Point Protocol over Ethernet for AirLink Modems
Configuring your router for PPPoE with the AirLink modem
If your network router has PPPoE discovery, the AirLink modem will be discovered on the intranet
through PPPoE discovery process, which uses broadcast Ethernet packets. Once found, the
modem
can be designated as the primary or failover connection.
Your network router should be configured to make a PPPoE connection using the username and
password configured with *HOSTUID and *HOSTPW, and the service name configured with
*MODEMNAME (optional). It should also be configured to re-route packets through the connec
-
tion with the modem.
If you encounter problems with operation of your AirLink modem, AirLink’s support staff can
help.
AirLink Support Web Site
The AirLink web site is updated frequently with Setup Wizards, Utilities, How-To Guides, and
other documentation: http://www.airlink.com/support.
AirLink Documentation and Guides
Modem User Guides - These guides are specific to your modem type, cellular provider, and
cellular technology and contain comprehensive information about the operation of the modem
and its features.
Modem Quick Start guides - These guides are also specific to the modem type, cellular pro-
vider, and cellular technology and are a step by step guide to activating the modem using the
Setup Wizard or other steps as applicable.
Utility Guides - These guides focus on the features of one of the AirLink modem utilities:
Wireless Ace, AceView, AceNet, Modem Doctor, etc.
Application Notes and How-To Guides - These guides detail configuring the modem to work
with a specific feature set or how the modem can be set up to work with a specific 3rd party
(non-AirLink) device.
Note: If you will be connecting directly, no hub or switch, from your computer or
router to the modem, you may need to disable the modem’s DHCP server com
-
pletely. To do so, you will need to use a terminal application and typed AT Com-
mands.
AirLink Technical Support
Caution: The configuration suggestions offered in this guide are not supported nor
is any equipment other than AirLink products. Only the operation of the modem or
software obtained directly from AirLink is supported.
Refer to the User Guide for your modem or the AirLink website for AirLink prod-
uct warranties.
Page view 10
1 2 ... 6 7 8 9 10 11 12

Comments to this Manuals

No comments