Sierra Wireless GL6110 User's Guide Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
WA_DEV_GL6100_PTS_001 Rev 002 May 24, 2010 62
GL61x0 Product Technical
Specification and User Guide
Power Consumption
12.1.1. Entering Sleep Idle Mode (only available on
GL6100)
There are two different methods to enter Sleep Idle mode using the AT+W32K AT command. The
differences between the two methods are described below:
12.1.1.1. Using AT+W32K = 1
Entering Sleep Idle mode is controlled by both the level of the DTR signal and the firmware.
The GL6100 will enter Sleep Idle mode when the DTR (viewed from the GL6100 perspective) is of
LOW voltage level. To wake the GL6100 up, it is necessary to toggle the DTR from a LOW voltage
level to a HIGH voltage level.
Note: The GL6100 will never enter Sleep Idle mode for as long as the DTR (viewed from the module side) is
of HIGH voltage level.
This method should be applied if the application needs to forbid entering Sleep Idle mode.
12.1.1.2. Using AT+W32K = 1,0
With this option, entering Sleep Idle mode is only controlled by the firmware.
When the GL6100 has had no activities for a certain time, it will enter Sleep Idle mode automatically,
regardless of the DTR level.
For more information regarding the AT+W32K AT command, refer to document [7] Firmware 7.42 AT
Commands Manual (Sierra Wireless Software Suite 2.32).
12.1.2. Entering Active/Sleep Mode
The GL6100 could be configured to enter Fast/Sleep mode using the AT+WBHV AT command. Refer
to the following table for the list of AT+WBHV parameters that can be used and their corresponding
description.
Table 45: AT+WBHV Behavior Configuration
AT+WBHV Command
Description
AT+WBHV=1,1
To enter Active mode.
AT+WBHV=1,2
To enter Sleep mode.
AT+WBHV=1,0
To disable Active/Sleep mode.
Note: The GL6100 must be restarted for the new behavior to be taken into account.
For more information about the AT+WBHV AT command, refer to document [7] Firmware 7.42 AT
Commands Manual (Sierra Wireless Software Suite 2.32).
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 95 96

Comments to this Manuals

No comments