Configuring the MP modem
Rev 2.0 Mar.10 51
Figure 4-2: Connect To
b. Change or verify the settings:
· Bits per Second: 115200 (default)
· Data Bits: 8
· Parity: None
· Stop Bits: 1
· Flow Control: Hardware.
Figure 4-3: Port Settings
Tip:
If you have configured the MP for settings different than the defaults for Bits per
Second, Data Bits, Parity, and/or Stop Bits, you will need to use your changed settings.
c. Select OK.
Using Ethernet:
d. Typ e i n 192.169.14.31 for Host Address.
Tip:
The Host IP address can be a default or one set up by the user.
e. Change the “Port Number” to 2332.
Comments to this Manuals