Sierra Wireless WISMO218 User Manual download pdf (Page 17)

WA_DEV_W228_UGD_002 Rev 003 Page 17 of 78

WISMO228 TCP/IP AT Commands

Manual

range: 0-100 (default value: 0)



escape sequence should be sent as data to the peer. By default, this option is set

. If set to 1,



range: 0-1(default value:1)

AT_WIP_NET_OPT_AUTO_SWITCH -

0: Does not automatically switch to AT mode

1: Switches automatically to AT mode

range: 0-1 (default value:0)

<action>:

requested operation on TCP/IP stack parameter management

stored configuration is erased (restore factory settings)

stores the current configuration parameters

<value>:

value range for different configuration options

<XX.YY.ZZ >:

TCP/IP AT Command release version

Note: UART(WIP_NET_OPT_SOCK_MAX + 1) sockets are reserved when UDP sockets are created (and not

for TCP sockets); one socket buffer is added to support/afford DNS accesses.

Parameter Storage

Only one IP stack configuration set can be saved into non-volatile memory.

 non-

volatile memory

 

 values wherever applicable, but it is still

possible to change 

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 78 79

No comments

Sierra Wireless WISMO218 User Manual Page 17