WA_DEV_W228_UGD_002 Rev 003 Page 26 of 78
WISMO228 TCP/IP AT Commands
Manual
Examples
1,0
6,1
OK
Note: Bearer UART1 is open but not started bearer GPRS is open
and started
OK
Note: No bearer has been opened yet
AT+WIPBR=1,6
Note: Open GPRS bearer
AT+WIPBR=2,6,11,”APN name”
Note: Set APN of GPRS bearer
AT+WIPBR=3,6,11
Note: Get APN of GPRS bearer
+WIPBR: 6,11,”APN name”
OK
AT+WIPBR=4,6,0
Note: Start GPRS bearer
AT+WIPBR=5,6
Note: Stop GPRS bearer
AT+WIPBR=0,6
Note: Close GPRS bearer
AT+WIPBR=1,5
Note: Open GSM bearer
AT+WIPBR=2,5,2,”phonenumber”
Note: Set the phonenumber for GSM bearer
AT+WIPBR=2,5,15,”1.1.1.1”
Note: Set the local IP address for GSM bearer
AT+WIPBR=2,5,16,”2.2.2.2”
Note: Set the destination IP address for GSM bearer
AT+WIPBR=3,5,15
Note: Read the local IP address for GSM bearer
+WIPBR: 5,15,”0.0.0.0”
OK
Note: Local IP address is not set as GSM bearer is still not
connected
Comments to this Manuals