WA_DEV_W228_UGD_002 Rev 003 Page 51 of 78
WISMO228 TCP/IP AT Commands
Manual
Examples
AT+WIPDATA=2,5,1
Note: TCP Client with index 5 can send/read data in
continuous mode.
CONNECT
<read/write data>
+++
OK
Note: +++ sequence causes the UART to switch to AT mode.
AT+WIPDATA=2,5,1,10,5
Note: TCP Client with index 5 can send/read data in
continuous mode
CONNECT
<read/write data>
+++
OK
Note: +++ sequence causes the UART to switch to AT mode
AT+WIPDATA=1,5,1
Note: UDP with index 5 can send/read data in continuous
mode
CONNECT
<read/write data>
+++
OK
Note: +++ sequence causes the UART to switch to AT mode
AT+WIPDATA=1,5,1
Note: UDP with index 5 can send/read data in continuous
mode
CONNECT
<read/write data>
<ETX>
OK
Note: [ETX] character indicates end of data
AT+WIPDATA=1,5,2
Note: UDP with index 5 can send/read data in continuous
transparent mode with default value set for <send size>
and <wait time>
CONNECT
<read/write data>
+++
OK
Note: +++ sequence causes the UART to switch to AT mode
AT+WIPDATA=1,5,2,20,2
Note: UDP with index 5 can send/read data in continuous
transparent mode with <send size> set to 20 and <wait
time> set to 2
CONNECT
<read/write data>
+++
OK
Note: +++ sequence causes the UART to switch to AT mode
Comments to this Manuals