Sierra Wireless AceView User's Guide download pdf (Page 29)

Installing and Activating AirLink GX400

Rev 2.0 Feb.12 29

Connecting to a Computer or Other

Device

The AirLink GX400 can be connected to the computer through an Ethernet,

serial, or USB connection.

Ethernet Port

Figure 3-5: Ethernet cable connector

The Ethernet port is a standard RJ-45 connector: two LEDs at the top of the port

indicate link and activity. The left LED blinks yellow during activity, and the right

LED is Green for 100 Mbps and Orange for 10 Mbps. The Ethernet port of the

AirLink GX400 can be connected directly to a computer or other Ethernet device

with either a crossover or a straight through cable. The Ethernet port on the

AirLink GX400 is auto-sensing, and it will auto-detect the speed of the connecting

device for 100baseTX or 10baseT.

Serial Port

Figure 3-6: Serial cable connector

The serial port of your AirLink GX400 can be connected directly to most

computers or other devices using a standard straight through cable. If you have a

DCE device, you will need a null device or null device cable. All local GPS (UDP

encapsulated) reports will come over the Ethernet connection. The serial port is

available for both initial product configurations and debugging.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 48 49

No comments

Sierra Wireless AceView User's Guide Page 29