WA_DEV_W228_UGD_002 Rev 003 Page 21 of 78
WISMO228 TCP/IP AT Commands
Manual
Bearers Handling +WIPBR
Description
The +WIPBR command can be used to:
select the bearer
start/close the bearer
configure different bearer options such as access point name
Syntax
if <cmdtype> = 0,1 or 5
Action Command
AT+WIPBR=<cmdtype>,<bid>
OK
if <cmdtype> = 2
Action Command
AT+WIPBR=<cmdtype>,<bid>,<opt num>,<value>
OK
if <cmdtype> = 3
Action Command
AT+WIPBR=<cmdtype>,<bid>,<opt num>
+WIPBR: <bid>,<opt num>,<value>
OK
if <cmdtype> = 4
Action Command
AT+WIPBR=<cmdtype>,<bid>,<mode>[,<login>,<password>,[<caller identity>]]
OK
Comments to this Manuals