Sierra Wireless WISMO218 User Manual download pdf (Page 9)

WA_DEV_W228_UGD_002 Rev 003 Page 9 of 78

WISMO228 TCP/IP AT Commands

Manual

1. Introduction

This manual presents detailed information about the AT command set associated with the Wavecom

IP feature.

AT Commands Presentation Rules

The AT commands in this document are presented as follows:

 A Description section provides general information on the AT command (or response)

behavior.

 A Syntax section describes the command and responses syntaxes and all parameter

descriptions.

 A Parameters and Defined Values section describes all parameters and values.

 A Parameter Storage presents the command used to store the parameter value and/or the

command used to restore the parameter default value.

 A Possible Errors presents the possible error codes that might be returned when the command

syntax is transmitted using the wrong parameters.

 An Examples section presents the real use of the described command.

 A Note section might also be included indicating some remarks about the command use.

 Figures are provided where necessary.

AT Commands Syntax

The AT command format and the default values for their parameters are presented as follows.

Command Line

Commands always start with 

Optional parameters are shown in brackets [ ].

Example:

AT+WIPcmd=<Param1>[,<Param2>]

<Param2> is optional. When the AT+WIPcmd is executed without <Param2>, the default value of

<Param2> is used.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 78 79

No comments

Sierra Wireless WISMO218 User Manual Page 9